Canard Aviation Forum  

Go Back   Canard Aviation Forum > Plane Specific Questions Tips, Tricks Area for All Canard Kits and Plans Planes > Cozy
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 09-12-2017, 02:44 AM
B52 B52 is offline
Member
 
Join Date: Sep 2017
Location: Australia
Posts: 1
Default CG and main undercarriage

1. Is the CG showing correct in a zero fuel weight status ?
2. what is the distance of the main wheel axis to front or back ends of the aircraft ?
3. Is prop axis tilted upwards in relation to the wings cord ?



Any advise input appreciated.
Reply With Quote
  #2  
Old 09-12-2017, 02:36 PM
LEZ1675 LEZ1675 is offline
Bill Welter
 
Join Date: Feb 2010
Location: Colorado Springs, CO
Posts: 523
Default Re: CG and main undercarriage

CG of the aircraft is computed with pilot weight, usually half tanks and oil. When the AC is built, it's weighed completely empty to establish a baseline, then other variables are added to compute flying CG.

Completely empty CG is not on the landing gear as shown, it should be slightly forward of the landing gear if the LG was installed properly. It will be really light on the nose gear though!

Distance from the nose to landing gear varies by aircraft and how the nose was built, for CG the standard measurements are taken from the front bulkhead.

Engine mount axis is tilted slightly upward (higher in rear) of the fuselage water line, 2 degrees, but bushing compression makes the engine thrust line about level.

You have the canard labeled Stabilizing force - part of the aircraft's weight is carried by the canard which is a lifting surface. That's what makes these planes stall-resistant. The canard stalls before the main wing, the nose drops, you get more airspeed, no more stall.

All of this is in the plans.
__________________
Bill Welter
Colorado Springs, CO
Long-EZ, Supercharged 13B

Last edited by LEZ1675 : 09-12-2017 at 11:59 PM.
Reply With Quote
Reply

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 11:48 PM.


Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.