Canard Aviation Forum  

Go Back   Canard Aviation Forum > Chapter Specific comments, questions, tips & tricks > Chap 19 - Wings & Ailerons
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 04-15-2017, 03:58 PM
EracerFL EracerFL is offline
Eracer MKII
Join Date: Dec 2006
Location: Tampa, FL
Posts: 7
Default Re: doing the wing skin layup alone

What helped me was to make a fixture to hold the fiberglass roll up high enough to let me pull it off and across the wing into position. The height of the roll was about 5 feet. Even with the cloth drooping some, it was above the microed wing and let me pre-position the cloth before I let it down. The roll holding fixture was made of some 2X4's and metal electrical conduit for the roll to rotate on. I also did the layups in colder weather that allowed more time for the epoxy to flow. It still took hours to wet out all the cloth but it wasn't bad.
Reply With Quote

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 07:49 PM.

Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.