Canard Aviation Forum  

Go Back   Canard Aviation Forum > Chapter Specific comments, questions, tips & tricks > Chap 19 - Wings & Ailerons
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Thread Tools Display Modes
Old 06-16-2017, 05:35 PM
LEZ1675 LEZ1675 is offline
Bill Welter
Join Date: Feb 2010
Location: Colorado Springs, CO
Posts: 508
Default Re: Nylaflow routing for Hidden Bellhorns

Right. But you already cut out the pockets in front of where the ailerons will be, so just go another 0.5" to 1" in front of that on the outboard side where your arrow is. You can always shine a light from below to see the cutout section and make sure where you are.

The two shaded areas in your diagram will be mostly sanded away later on when glassing that pocket, and the red dot looks like a good location for the conduit, want to stay in front of the pocket, not on top because that foam will be gone.

The hinges are on top of that cutout, and won't be anywhere near the conduit.
Bill Welter
Colorado Springs, CO
Long-EZ, Supercharged 13B
Reply With Quote
Old 06-19-2017, 12:34 PM
jpolenek's Avatar
jpolenek jpolenek is offline
Join Date: Apr 2007
Location: Guelph, Ontario
Posts: 185
Default Re: Nylaflow routing for Hidden Bellhorns

Follow-up: It turned out well. Starting at 4.8" aft of the shear web at the wing root (per plans), and passing 1.5" forward of the aileron tip, the straight run of conduit intersected the 1.2" line (parallel to, and fwd of, the TE) at about 5" from the wing tip. This allowed for a gentle bend to point the conduit to the future location of the hidden belhorn.

Cozy MkIV #1550
Reply With Quote
Old 06-19-2017, 02:49 PM
TMann's Avatar
TMann TMann is offline
Got Foam?
Join Date: Mar 2007
Location: Omaha, NE
Posts: 3,561
Default Re: Nylaflow routing for Hidden Bellhorns

Good job!
The wings and winglets are a terrific motivator.
You can create large parts and make some quick progress.
T Mann
Long-EZ/20B Infinity R/G Chpt 18
Velocity/RG Restoration
EAA #390365
Got Foam?
Mann's Airplane Factory
We add rocket's to everything!
4, 5, 6, 7, 8, 10, 13, 14, 19, 20 DONE
Reply With Quote

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -4. The time now is 01:28 AM.

Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.